Maintenance Electrical Systems BIT-2B and BIT-2A

Maintenance Electrical Systems BIT-2B and BIT-2A

19-01-2017 00:00:00 - 19-01-2017 07:00:00

Following the annual electrical inspection we will perform maintenance on January 19th between 00:00 hours and 07:00 hours. The bypass power for both UPS on floor BIT-2B will be serviced, one at a time. The UPS will not lose their primary power feed and will function as intended. The power feed serviced will only lose complete power in the unlikely event of a failing UPS during the maintenance. At all times at least one of two power feeds in your rack will be in full operation, this remaining power feed is able to power all the systems.

In addition to this maintenance several changes will be made in BIT-2A. To ensure our safety during this maintenance it is possible that, if needed, the power feed serviced will be temporarily interrupted.

If you have received warnings from BIT that your total power consumption is close to the limit, we recommend that you take action before this maintenance starts and we recommend that you check if your equipment is connected to both power feeds or connected to an ATS.

This maintenance will be supervised by BIT engineers.

If you have any questions regarding this maintenance, please contact the Customer Care department by phone on +31 (0)318 648 688 or by email on support@bit.nl .