- 15-04-24Periodic maintenance cooling system BIT-1
- 11-04-24Maintenance computair units BIT-2A
- 09-04-24Maintenance computair units BIT-2C
- 08-04-24Maintenance computair units BIT-2B
- 05-04-24Firewall Maintenance
- 04-04-24Periodic maintenance fire detection and suppression systems BIT-2A and BIT-2BCD
- 04-04-24Maintenance diesel tanks power generators BIT-2A
- 04-04-24Maintenance diesel tank power generator BIT-1
- 27-03-24Maintenance temperature sensor BIT-2A
- 21-03-24Maintenance power generator BIT-1
Periodic maintenance UPS-sets BIT-2A Feed-B
On Thursday, June 29th between 0.00 and 7.00h our UPS-set supplier will be performing periodic maintenance on our UPS-sets in BIT-2A Feed-B.
During this maintenance the UPS-sets will be put in bypass mode one by one. We do not expect any disruption in the power supply, but it is possible that the ATS in your rack (if applicable) will switch to the other power feed. If you have received warnings from BIT that your total power consumption is close to the limit, we recommend that you take action before this maintenance starts.
In case of disruption of one of the power feeds, which we do not expect, the other feed will be available as normal. We do recommend that you check if your equipment is connected to both power feeds.
If you have any questions regarding this maintenance, please contact the Customer Care department by phone on +31 (0)318 648 688 or by email on support@bit.nl.