- 25-04-24Periodic maintenance cooling system BIT-2BCD
- 22-04-24Periodic maintenance cooling system BIT-2A
- 18-04-24Maintenance diesel tanks power generators BIT-2A
- 15-04-24Periodic maintenance cooling system BIT-1
- 11-04-24Maintenance computair units BIT-2A
- 09-04-24Maintenance computair units BIT-2C
- 08-04-24Maintenance computair units BIT-2B
- 05-04-24Firewall Maintenance
- 04-04-24Periodic maintenance fire detection and suppression systems BIT-2A and BIT-2BCD
- 04-04-24Maintenance diesel tanks power generators BIT-2A
Maintenance BIT-2B UPS B-feed
25-06-2019 00:00:00
- 25-06-2019 07:00:00
Urgency: Planned
Affected services: Equipment in BIT-2B
Expected impact: Possible loss of power redundancy
Customer intervention required: No
Reference number: 161915
Contact: +31 318 648 688, support@bit.nl
Summary:
On Tuesday the 25th of June between 00:00 hrs and 07:00 hrs, our supplier will be performing maintenance on our B-feed UPS in BIT-2B. During this maintenance our supplier will replace the batteries on the B-feed of the UPS with new batteries.
Details:
During the battery replacement, at least one feed will be available continuously. During this maintenance the B-feed UPS will be put in bypass mode. We do not expect any disruption in the power supply, but it is possible that the ATS in your rack (if applicable) will switch to the other power feed. If you have received warnings from BIT that your totalpower consumption is close to the limit, we recommend that you take action before this maintenance starts.
In case of disruption of one of the power feeds, which we do not expect, the other feed will be available as normal. We do recommend that you check if your equipment is connected to both power feeds.
Affected services: Equipment in BIT-2B
Expected impact: Possible loss of power redundancy
Customer intervention required: No
Reference number: 161915
Contact: +31 318 648 688, support@bit.nl
Summary:
On Tuesday the 25th of June between 00:00 hrs and 07:00 hrs, our supplier will be performing maintenance on our B-feed UPS in BIT-2B. During this maintenance our supplier will replace the batteries on the B-feed of the UPS with new batteries.
Details:
During the battery replacement, at least one feed will be available continuously. During this maintenance the B-feed UPS will be put in bypass mode. We do not expect any disruption in the power supply, but it is possible that the ATS in your rack (if applicable) will switch to the other power feed. If you have received warnings from BIT that your totalpower consumption is close to the limit, we recommend that you take action before this maintenance starts.
In case of disruption of one of the power feeds, which we do not expect, the other feed will be available as normal. We do recommend that you check if your equipment is connected to both power feeds.