- 15-04-24Periodic maintenance cooling system BIT-1
- 11-04-24Maintenance computair units BIT-2A
- 09-04-24Maintenance computair units BIT-2C
- 08-04-24Maintenance computair units BIT-2B
- 05-04-24Firewall Maintenance
- 04-04-24Periodic maintenance fire detection and suppression systems BIT-2A and BIT-2BCD
- 04-04-24Maintenance diesel tanks power generators BIT-2A
- 04-04-24Maintenance diesel tank power generator BIT-1
- 27-03-24Maintenance temperature sensor BIT-2A
- 21-03-24Maintenance power generator BIT-1
Periodic maintenance power distribution BIT-2BCD
12-07-2019 00:00:00
- 12-07-2019 07:00:00
Urgency: Planned
Affected services:
- Feed B BIT-2B
- Feed B BIT-2C
- Feed B BIT-2D
Expected impact: None
Customer intervention required: No
Reference number: 162868
Contact: +31 (0)318 648 688, support@bit.nl
Summary:
Periodic maintenance will be carried out on the power distribution of
BIT-2BCD.
Details:
Periodic maintenance will be carried out and a thermographic inspection
will be conducted on the power distribution panel of BIT-2BCD. During
this maintenance all main power switches will be serviced, therefore the
UPS systems will be put in bypass mode one at a time.
We do not expect interruption of power to the UPS systems during this
maintenance. In the unlikely event of interruption, the remaining feed
is able to power all the systems. There will always be one feed fully
operational.
We strongly advice all customers to make sure all equipment is connected
to both power feeds.
This maintenance will be supervised by BIT engineers.
Affected services:
- Feed B BIT-2B
- Feed B BIT-2C
- Feed B BIT-2D
Expected impact: None
Customer intervention required: No
Reference number: 162868
Contact: +31 (0)318 648 688, support@bit.nl
Summary:
Periodic maintenance will be carried out on the power distribution of
BIT-2BCD.
Details:
Periodic maintenance will be carried out and a thermographic inspection
will be conducted on the power distribution panel of BIT-2BCD. During
this maintenance all main power switches will be serviced, therefore the
UPS systems will be put in bypass mode one at a time.
We do not expect interruption of power to the UPS systems during this
maintenance. In the unlikely event of interruption, the remaining feed
is able to power all the systems. There will always be one feed fully
operational.
We strongly advice all customers to make sure all equipment is connected
to both power feeds.
This maintenance will be supervised by BIT engineers.